Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Driveway & Pavers for Mesquite Homeowners
Mesquite sits on heavy black clay that holds water after a rain and then shrinks and cracks when the summer sun bakes it dry. That soil movement is why so many driveways here end up with spiderweb cracks, sunken panels and pavers that heave out of line within a few seasons. A driveway that looked solid two summers ago can be holding water against your foundation slab right now, and you won’t know until the edge starts to break down.

We handle the full hardscape scope for Mesquite homes: paver driveways, concrete, asphalt, repairs, patios and walkways, all under one contract with one point of accountability. Our technicians have up to 13 years of experience setting base, cutting brick and stamping concrete in North Texas ground conditions, and we work with name-brand material lines like Belgard, Unilock and Tremron so you know what’s going under your tires. We pull permits where the city requires them and the written estimate sets the final price.
Call (844) 761-6059. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What Our Driveway & Pavers Service Includes
Hardscape work lives or dies on what’s under the surface. We build every driveway, patio and walkway on a compacted, properly graded base so water runs away from the house instead of sitting on top of it. Here’s how each piece of the scope works.
Paver Driveways
A paver driveway is a segmented surface set on a compacted aggregate base, with joints that flex instead of cracking when the clay underneath moves. You need one when your current drive has settled into ruts, when you want a surface you can pull up and re-lay after a utility repair, or when you’re matching the front elevation to the rest of the house. We lay Belgard and Unilock pavers over a graded, plate-compacted base with edge restraint, and we sweep polymeric sand into the joints so the finished drive stays tight through Mesquite’s wet spring and dry August cycles.
Concrete Driveways & Concrete Work
Poured concrete is the most common driveway surface in Mesquite, and it’s the right choice when you want a clean, low-maintenance finish at a lower entry cost than pavers. You need it replaced when you’re seeing wide cracks, spalling at the control joints, or panels that have dropped and now trap water. We form and pour with proper thickness, cut control joints at the right spacing, and use Sakrete mixes for patching and small pours so the repair blends with the field. Concrete for sidewalks, approach aprons and slab work can be coordinated on the same job.
Asphalt Driveways & Resurfacing
Asphalt is the budget-friendly option and the fastest to drive on once it cures, which makes it a fit for longer driveways and quick-turn projects. It’s the right call when you’ve got an existing blacktop surface that’s oxidized but structurally sound and needs a fresh wear course rather than a full tear-out. We prep and grade the base, set the asphalt to drain away from the garage, and resurface where the sub-base is still holding so you’re not paying to replace what isn’t broken.
Driveway Repair & Replacement
Repair is for localized failures: a handful of cracked panels, one sunken section, a settled approach apron. Replacement is the honest answer when the failure runs through the base, when more than half the surface has moved, or when drainage has been wrong from the start. We assess the base before we quote, because patching a slab over a bad subgrade just buys you another two years. If replacement is the right call, we tear out, re-grade and rebuild in one pass.
Patios, Walkways & Pool Decks
These are the surfaces you actually spend time on, so they get the same base work as the driveway. You need a patio or walkway when your current path is a muddy strip, when pool decking has gone slippery or uneven, or when you’re adding an outdoor living area to the back of the house. We lay paver patios and walkways in the same brand families as the driveway so the front and back of the property read as one design, with slope and drainage worked out before a single paver goes down.
Brick Paver Driveway
Brick pavers give you a driveway that looks nothing like the neighborhood standard, and they age well under North Texas sun. You want a brick paver drive when curb appeal and resale matter, or when you’re matching an existing brick house, fence pier or entry walk. We set brick pavers in a range of patterns and colors with proper base depth, edging and sand-filled joints, and we can carry the same paver family from the street to the front door.
Stamped Concrete Driveway
Stamped concrete imprints a pattern and texture into a poured slab so it reads as stone, slate or brick without the individual pieces. It’s the right fit when you want the look of pavers with a seamless surface and no joints for weeds. We pour, stamp and color-cure the slab to a consistent pattern across the full drive, with control joints cut where they blend into the stamp rather than cutting across the design.
Driveway Sealing
Sealing slows down oxidation, blocks water from working into hairline cracks and refreshes the color on concrete, asphalt and pavers. You need it when the surface has gone chalky, when water stops beading and starts soaking in, or when the joints on a paver drive have gone sandy. We clean the surface first, let it dry fully, then apply a sealer suited to the material so the coat cures evenly and doesn’t trap moisture underneath.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Driveway & Pavers
Belgard pavers are one of the most requested hardscape lines we work with, and knowing the product matters. Their dimensional and plank-style pavers have specific base depth and edge restraint requirements, and their color blends weather differently depending on sun exposure across a driveway. We spec Belgard where the design calls for a structured look with tight joint tolerances, and we set them on a base built for the load.
Unilock and Tremron round out the options. Unilock’s tumbled and textured lines suit driveways where you want a softer, older-stone read, and their system pieces make transitions between driveway and walkway cleaner. Tremron pavers are a solid choice where you’re covering a large footprint and want consistent color from pallet to pallet. We also use Sakrete mixes for concrete patching and small pours where the repair needs to match the surrounding slab. Whether you’re leaning toward Belgard, Unilock, Tremron or another line entirely, we help you choose based on how the surface will wear, not on what’s easiest to source.

Signs You Need Driveway & Pavers Right Now
- Water pooling against the garage or foundation. Standing water after a rain means the slope is wrong or the base has settled. Left alone, that water finds its way under the slab and into the soil around your foundation.
- Cracks wider than a pencil or panels that have dropped. Cracks that spread and widen are a sign the base under the slab has moved. A small crack is a repair; a network of them usually means the section is done.
- Pavers that are heaving, rocking or spreading at the edges. This points to failed edge restraint or a base that wasn’t compacted properly. Re-laying now is far cheaper than rebuilding the whole drive.
- Spalling, chalky surface or exposed aggregate. The top layer breaking down leaves the slab open to moisture, which speeds up the failure. A seal and repair can stop it if you catch it early.
- Asphalt that’s alligator-cracked or raveling at the edges. Fine cracking in a web pattern or loose gravel at the margins means the binder is failing. Resurfacing while the base is still sound saves you a full replacement.
Our Driveway & Pavers Process – Step by Step
- 1
On-site assessment and drainage check. We walk the existing surface, check where water runs, probe the base where we can, and photograph the failure points. You get a clear read on whether repair or replacement is the honest answer.
- 2
Design and material selection. We help you choose between paver, concrete, asphalt and stamped finishes, and walk you through the brand options in each. You see the patterns, colors and thicknesses side by side before committing, and the written line-item estimate spells out exactly what’s included.
- 3
Permits and scheduling. Where the city requires a permit for new or replaced hardscape, we handle the application. You get a written start date and a realistic finish window before work begins.
- 4
Demolition, grading and base build. Old surface comes out, the subgrade gets graded to drain away from the house, and the new base goes in compacted in lifts. This is the step that determines how long the finished driveway lasts, and it’s the one most jobs cut short.
- 5
Install, clean-up and final walkthrough. Surface goes down, joints get sanded, edges get restrained and the site gets cleared. We walk the finished work with you, go over sealing or care, and hand over the warranty terms in writing.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Driveway & Pavers Cost in Mesquite?
A typical paver driveway installation in Mesquite runs $7,000 – $18,000 depending on square footage, paver line and base depth. Concrete driveway installation runs $4,500 – $12,000, and asphalt paving runs $3,500 – $9,000. A full driveway replacement, tear-out included, runs $5,000 – $14,000. If you’re sealing rather than replacing, driveway sealing runs $250 – $700, and a paver patio installation runs $3,500 – $11,000.
What moves the number: total square footage first, then base depth (heavy clay may need more excavation and aggregate than you’d expect), then material. Belgard and Unilock pavers sit at the higher end of the paver range; standard concrete at the lower end of its own. Saw-cutting and hauling away the old slab adds cost to a replacement. Drainage corrections, retaining edges and approach apron work can add on top.
How to avoid overpaying: get a line-item written estimate rather than a lump sum, confirm base depth and compaction are specified, and make sure disposal is included. A cheap quote that skips the base will cost you twice.
Every free estimate from us is itemized: square footage, material, base work, disposal, permits and a stated finish price. No change orders once work starts unless you add scope. Call (844) 761-6059 for yours.
Driveway & Pavers Near Mesquite – Our Service Area
We work hardscape projects across Mesquite and the surrounding cities, including Balch Springs, Garland, Dallas, Hutchins, Lancaster, DeSoto, Richardson, Murphy, University Park, Highland Park and Addison. Scheduling is set at the estimate, and proximity usually means a similar timeline across the east Dallas County area. If you’re comparing options, our driveway & pavers page covers the neighbor market, and driveway & pavers in Garland works the same way. You can also start at our Construction Mesquite home page to see the full scope.
Serving Mesquite, TX – Our Local Coverage Area
We serve Mesquite and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Driveway & Pavers in Mesquite
It’s the design, base prep and installation of the hard surfaces around your home: driveways in paver, concrete or asphalt, plus patios, walkways, pool decks, repairs, replacement and sealing. The base work is what separates a driveway that lasts from one that fails in three years. We handle the whole scope under one contract, from tear-out to the final sanded joint. Call (844) 761-6059 for a free estimate.
A concrete driveway typically takes a few days from tear-out to cure, while a paver driveway or patio usually runs longer because of the base build and hand-setting. Replacement jobs add demolition and disposal time. We give you a written start date and finish window at the estimate so you can plan around it. Call (844) 761-6059 and we’ll scope your project.
Paver driveway installation typically runs $7,000 – $18,000, concrete $4,500 – $12,000, asphalt $3,500 – $9,000, and full replacement $5,000 – $14,000. Sealing runs $250 – $700 and a paver patio $3,500 – $11,000. Square footage, base depth and material line drive the final number, and the written estimate sets the price. Call (844) 761-6059 for an exact quote; estimates are free.
Yes. We install Belgard, Unilock and Tremron pavers and know the base depth and edge restraint each line needs to perform in North Texas clay. We also use Sakrete mixes for concrete patching where a repair has to blend with an existing slab. We help you choose between the lines based on pattern, color and how the surface will wear. Call (844) 761-6059 to talk through options.
We can often get an assessment out the same day depending on the schedule. We answer 24/7 for the phone line, and fast dispatch runs from 7am to 7pm, Sunday through Friday (we’re closed Saturday). A call outside dispatch hours is booked into the next opening. Call (844) 761-6059 and we’ll find you the soonest slot.
We back our hardscape work with a workmanship warranty spelled out in writing at the estimate, covering installation and base work. Manufacturer warranties on paver and concrete products come from the brand itself, and we’ll point you to the terms. You get the warranty document in hand at the final walkthrough, not a verbal promise. Call (844) 761-6059 for details on your project.
Clear vehicles and anything stored on the driveway or patio before the start date, and move potted plants or decorations away from the work zone. If the job involves a gate or fence line, let us know so we can plan access. We handle demolition, hauling and site protection. Call (844) 761-6059 with any access questions before we start.
Schedule Your Driveway & Pavers Service in Mesquite Today
Whether it’s a cracked concrete slab you’ve been stepping over for two summers or a full paver driveway you’ve been planning, we’ll walk the property, check the base and drainage, and put a line-item estimate in your hands. One contractor, every project phase, from the driveway to the roofline. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (844) 761-6059 for a free, no-obligation estimate and a written price that holds.
Written by the team at Construction Mesquite.