Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Mesquite Homeowners Choose ES Windows Construction
We provide independent ES Windows construction service in Mesquite, and what sets our work apart is that we handle these vinyl and aluminum units as a specialty, not a sideline. We know how they’re built for Texas heat and wind, we know the hardware that fails first, and we source parts that fit the frame you already have. One contractor, every project phase.
ES Windows is a Texas-based manufacturer, which matters in Mesquite. These products are designed for the conditions we actually live in: long hot summers, spring and fall storm bursts, wind-driven rain. Generic remodelers install windows the same way everywhere. We don’t. We work on ES Windows because local homeowners need someone who understands how these units age in North Texas, from the tilt-latch on a single-hung to the rollers on a sliding patio door.
To be clear, we’re an independent ES Windows service provider. We are not affiliated with, authorized by, or endorsed by the manufacturer. We repair, install, and service ES Windows equipment with quality parts that fit it. Call (844) 761-6059 for a free estimate.
Why Trust Construction Mesquite for Your ES Windows Construction?
Our technicians have up to 13 years of experience, and a good share of that time has been spent on ES Windows units across Mesquite. That matters because familiarity with a product line isn’t something you can fake. When you’ve replaced a tilt-latch on a single-hung a few dozen times, you know which latches wear out fast and which ones hold up. When you’ve pulled a sliding patio door out of a track, you know whether the problem is the roller, the track, or the seal behind it.
We choose quality parts that fit ES Windows equipment. For latches, rollers, and weather seals, we use OEM ES Windows parts when they’re available, because fit and function matter. On out-of-production models, we’ll source quality aftermarket equivalents that meet the same standard. We won’t force a part that doesn’t belong.
Warranty-safe service is part of the job. We don’t do anything that would needlessly jeopardize your ES Windows warranty. If a repair can preserve the unit, we repair it. If replacement makes more sense, we tell you why. You get a written line-item estimate before any work starts, so you know the price and the scope. The written estimate sets the final price.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common ES Windows Construction Problems We Fix in Mesquite
These are the failures we see on ES Windows units in Mesquite. They’re worth knowing about before you call anyone.
- Faulty tilt-latch mechanisms on single-hung and double-hung units. The tilt-latch is what holds the sash in place and lets you tilt it in for cleaning. When it wears or gets misaligned, sashes bind or won’t stay put. In a bad case, a sash can fall out while you’re cleaning it. The latch assembly usually needs replacing, and the sash balance and weather seal should be checked at the same time.
- Failed weatherstripping and sweeps on sliding patio doors. The sweep at the bottom of the door and the weatherstripping around the frame take the abuse. In North Texas heat, the sweep dries out and flattens, and water starts coming in during heavy spring and fall storms. You’ll notice a draft, a wet threshold, or daylight under the door.
- Condensation between panes from seal failure in dual-pane insulated glass units. The seal around the glass fails over time, moisture gets between the panes, and you get fog or water spots you can’t clean off. The glass unit is the problem, not the frame. On older units, replacing the IGU may not be cost-effective compared to replacing the window.
- Corroded or misaligned rollers and tracks on sliding windows and doors. Dirt, grit, and heat take their toll on rollers and tracks. The door or sash drags, jumps the track, or takes real effort to move. Most of the time the fix is new rollers and a track that’s cleaned and aligned. If the track itself is bent or corroded through, that’s a bigger repair.
- Storm and hail damage to glazing and frames. Hail doesn’t just hit roofs. It hits window glass, frames, and screens. A cracked pane or a dented frame after a storm needs prompt attention before water gets behind it. Roof repair and window repair often go together after a Mesquite hailstorm.
ES Windows Parts & Our Repair-vs-Replace Approach
Parts choice is where a lot of ES Windows repairs go wrong. A latch that doesn’t match the sash profile will bind. A roller with the wrong wheel diameter will drag. We source quality parts that fit ES Windows equipment, and where OEM ES Windows parts are available for latches, rollers, and weather seals, we use them to preserve fit and function. We don’t claim to stock or carry OEM parts on hand. We source what’s needed for your job.
Repair or replace? It depends on the unit and the damage. A worn tilt-latch, a failed sweep, a bad roller, or deteriorated weatherstripping on an ES Windows 4000 Series or 6000 Series unit is almost always a repair. The frame and sash are sound, and the fix restores smooth operation and a tight seal. Condensation between panes is different. The insulated glass unit has failed, and on a window that’s already aged, replacing the IGU often costs close to what a new window does. When frame or glass damage is extensive, replacement is usually more cost-effective.
We’ll tell you which side of that line your unit is on. Call (844) 761-6059 to schedule a free estimate.
Our ES Windows Service Process – Step by Step
- 1
Diagnosis. We look at the unit and find the actual cause, not just the symptom. A sash that won’t stay open isn’t always a latch problem. Sometimes it’s a balance issue. A sliding door that’s hard to move isn’t always a roller problem. Sometimes it’s a misaligned track. We check the latch, balance, weather seal, rollers, track, and glass unit.
- 2
Repair or install. For repairs, we replace the failed component with a quality part that fits ES Windows equipment. For installations, we follow the manufacturer’s requirements so the unit performs as designed. On ES Windows 8000 Series casements and sliding patio doors, correct installation and flashing detail is critical in Mesquite’s storm season.
- 3
Test. We open, close, tilt, and lock every unit after the work. On windows, we check the seal. On sliding doors, we check the sweep and weatherstripping. On replacement installs, we check for smooth operation and a tight fit. If it doesn’t work right, it’s not finished.
- 4
Warranty and documentation. You get a written record of the work, the parts used, and what to watch for. That documentation matters if you ever need to file a warranty claim with ES Windows or with us. We stand behind our workmanship.
See the difference
Before
After
Before
After
Before
AfterES Windows Products We Service & Install in Mesquite
We service and install the ES Windows product types you’d find in Mesquite homes, both the units already in place and new installations. That includes the ES Windows 4000 Series Single-Hung, the ES Windows 6000 Series Double-Hung, the ES Windows 8000 Series Casement, and the ES Windows Sliding Patio Door.
These cover the vast majority of residential window and door needs in our market. We handle window replacement, impact window installation, and roof repair as it relates to storm-damaged windows and their surroundings. If you have an ES Windows unit that’s fogged, won’t latch, won’t slide, or leaks, we can look at it and tell you what it needs.
Mesquite’s built-out housing stock means most of these units are working in homes from the 1960s through the 1980s. They’ve seen a lot of heat and a lot of storms. They’re not new, and they don’t need to be treated like new.
We Also Service These Brands
Construction Mesquite isn’t tied to a single brand. Alongside ES Windows work, we handle KraftMaid and Wellborn cabinetry, Cambria, Silestone, and Caesarstone countertops, and fixtures from Kohler and Moen, among others. That multi-brand reach matters when your project runs from the windows to the kitchen, because one team handles both phases with the same standard. We help you choose materials, and we stand behind the work.
FAQs – ES Windows Construction Service in Mesquite
No. We are an independent ES Windows service provider and are not affiliated with, authorized by, or endorsed by the manufacturer. We repair, install, and service ES Windows products with quality parts that fit them. That independence lets us give you a straight recommendation on repair versus replace, even when the answer is that replacement makes more sense.
Yes. We use OEM ES Windows parts for latches, rollers, and weather seals when they’re available, to preserve fit and function. On out-of-production models, we source quality aftermarket equivalents. We don’t claim to stock or carry OEM parts. We source what your job needs, and we tell you what’s going in.
Most ES Windows repairs finish in a single visit, but the timeline depends on the part. A tilt-latch replacement is quick once the right part is on hand. A sliding patio door that needs new rollers, tracks, and seals takes longer. Installation timelines depend on the scope and permit requirements. You get a written estimate with the scope and price before work begins. Call (844) 761-6059 for an exact quote. Estimates are free.
We cover ES Windows single-hung and double-hung windows, casements, and sliding patio doors, including the common series found in Mesquite homes. We handle window replacement, impact window installation, and roof repair as it relates to storm damage near window openings. If you have a unit that’s fogged, sticking, leaking, or won’t latch, we can diagnose it.
Not when the work is done correctly with parts that fit. Warranty terms are set by ES Windows, not by us, but warranty-safe service means using the right parts and not making modifications that would trip a manufacturer’s requirements. We document what we did and what parts we used, so you have a record. If a repair is likely to affect warranty coverage, we tell you before any work starts.
Typical estimated ranges for Mesquite are below. These are estimates only, and the written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair | $400 – $1,800 |
Call (844) 761-6059 for an exact quote. Estimates are free.
Book Your ES Windows Service in Mesquite, TX
If your ES Windows unit is fogged, sticking, leaking, or won’t latch, we can look at it and tell you what it needs. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (844) 761-6059 for a free estimate. Written line-item quote, one accountable team, from the roofline to the windows.
Written by the team at Construction Mesquite.