Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Mesquite Homeowners Choose CGI Construction
Construction Mesquite provides independent CGI construction, repair and installation service in Mesquite, connecting homeowners with local specialists who work with CGI cabinetry and closet systems directly. What sets our CGI work apart is depth: we specify, source and install CGI product without a showroom tying our hands, and we know the cabinet-box and hardware failures that show up in Mesquite’s slab-on-grade, humid-climate homes. Our technicians have up to 13 years of experience. We are an independent service provider. Construction Mesquite is not affiliated with, authorized by, sponsored by or endorsed by CGI, and we’re upfront about that. Our role is to connect Mesquite homeowners with independent local professionals who perform the work. From the driveway to the roofline, we handle cabinet installation and refacing, full kitchen remodeling and quartz and granite countertops alongside roofing, windows and doors, fencing, driveways and pavers, bathroom remodeling, and home additions and ADUs, all under one contract. Call (844) 761-6059 to schedule a free estimate.
Why Trust Construction Mesquite for Your CGI Construction?
Because CGI is a cabinetry and closet-system brand rather than a single factory-built appliance, the details that decide a good install are the ones a general remodeler skips. Box construction, hardware platforms and finish options are where CGI cabinets live or die, and independent specialists who work with that product daily understand them better than anyone walking a job cold. We match those pros to your Mesquite project.
We repair, install and service CGI equipment with quality parts that fit it, and we keep the work warranty-safe, which means we don’t cut corners that quietly void the coverage on the cabinet line you already own. We’re not a CGI dealer and we don’t claim to be an authorized or factory-trained installer. We are an independent provider that knows the product and will tell you plainly when a box is worth saving and when it isn’t. That honesty protects both the cabinets and your budget. Call (844) 761-6059. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Fix in Mesquite
CGI cabinet and closet problems tend to follow a few clear patterns. Here are the ones we see most in Mesquite homes, what causes them, and how a qualified pro reads the symptom.
- Swollen, delaminating boxes at the sink base or dishwasher opening. A slow supply-line or drain leak goes unnoticed for months, and particleboard or MDF-box RTA units soak it up and blister along the bottom edges. The leak is the real problem; the cabinet just tells you it’s been happening.
- Doors that no longer close flush and drawers that rub the face frame. Soft-close hinges and undermount drawer slides lose adjustment after a few years of daily use, so doors rack and drawers catch. It’s a hardware issue, not a box issue, and it’s often fixable without replacing a single cabinet.
- Mildew and a musty odor in the cabinet bottoms. Toe-kicks and cabinet backs installed tight to a slab or exterior wall without a vapor gap trap moisture during Mesquite’s humid months. The smell is the giveaway, and the fix is a proper gap plus ventilation.
- Checking, yellowing paint and tired finishes. Shaker-style doors and painted finishes crack and discolor near range hoods and windows where heat and UV hit the surface unevenly. A finish issue usually means refinishing or new doors, not a new kitchen.
- Racked closet and pantry shelving. Adjustable shelving systems drift out of level over time, especially on walls that have moved with the clay soil. Re-leveling the standards and resetting the pins restores the system rather than replacing it.
CGI Parts & Our Repair-vs-Replace Approach
We start from the box material, because that decides everything. If the cabinet boxes are solid and only the doors, drawers and hardware are worn, a reface or re-box of the fronts is the right call and saves you real money. If the box has swelled, gone spongy or the layout no longer fits the room, replacing the full unit is the honest answer and no amount of hardware will rescue it.
On hardware, we use CGI OEM hinges, slides, shelf pins and touch-up finish where the cabinet line is still supported. When OEM parts are discontinued, we match color and profile with quality aftermarket hardware that fits the unit and holds up. We don’t claim to stock or carry genuine CGI parts. We source what fits and we stand behind the fit.
If your cabinets are past the point of a hardware fix, call (844) 761-6059 for a free estimate. A written line-item quote sets the final price, and there are no change orders once the work is scoped.
Our CGI Service Process – Step by Step
- 1
Diagnosis. We pull the drawers and look inside the box at the sink base and dishwasher opening, check the toe-kick and vapor gap against the slab or exterior wall, and test every hinge and slide. We separate hardware problems from box problems before we quote anything.
- 2
Repair or install. Leaks get shut off and fixed first, because a new cabinet over an active drip is wasted money. Then we set the matching CGI box, re-level the run, reset hardware and confirm the soft-close action is even across every door.
- 3
Countertop and backsplash fit. We reset or template the quartz or granite surface and the backsplash so the new unit sits plumb and seams line up. A cabinet that’s out of level shows up here if it isn’t caught earlier.
- 4
Test and warranty. Doors, drawers, shelves and finish get a final pass with you present. We walk the warranty on our workmanship so you know exactly what’s covered and what isn’t.
See the difference
Before
After
Before
After
Before
AfterCGI Products We Service & Install in Mesquite
We service and install CGI ready-to-assemble all-plywood kitchen cabinets and pre-assembled plywood cabinet boxes with soft-close drawer slides. That covers CGI closet and pantry systems with adjustable shelving, and the CGI bath vanity and linen cabinet lines that go into a Mesquite bathroom remodel. We handle cabinet installation and refacing, full kitchen remodeling, and quartz and granite countertops as part of the same scope, so the cabinets, the surface above them and the backsplash behind them get planned together rather than stitched together by three different trades. Our technicians have up to 13 years of experience across these lines.
We Also Service These Brands
CGI is one line in a much larger material portfolio. We also work with KraftMaid and Wellborn cabinetry, Cambria, Silestone and Caesarstone countertops, and Kohler, Moen, Toto and Grohe fixtures, along with leading roofing, window, door, fencing and paver brands. That means you aren’t locked into a single product family when a matching profile, a different finish or a better countertop option makes more sense for your Mesquite project. One contractor, every project phase, and a brand choice we help you make.
FAQs – CGI Construction Service in Mesquite
Is Construction Mesquite authorized by CGI? No. Construction Mesquite is an independent CGI service provider and is not affiliated with, authorized by, sponsored by or endorsed by CGI. We connect Mesquite homeowners with independent local professionals who work with the product and know it well.
Do you use quality parts that fit CGI equipment? Yes. We use CGI OEM hinges, slides, shelf pins and touch-up finish where the line is still supported, and match color and profile with quality aftermarket hardware only when OEM is discontinued. We don’t claim to stock genuine CGI parts; we source what fits and holds up.
How long does CGI service take? A hardware adjustment or a single base-cabinet swap is usually a short job, while a full run of new cabinets with countertops and backsplash runs longer and depends on the countertop fabrication schedule. We give you a realistic timeline in the written estimate before work starts.
What kinds of CGI products do you cover? Ready-to-assemble all-plywood kitchen cabinets, pre-assembled plywood cabinet boxes with soft-close slides, closet and pantry systems with adjustable shelving, and bath vanity and linen cabinet lines.
Will service void my CGI warranty? Proper installation and repair by a qualified pro protect the coverage rather than voiding it, but the manufacturer’s terms govern and we don’t make warranty claims on CGI’s behalf. Ask us to walk the warranty-safe practices before we start.
How much does CGI construction cost in Mesquite? Cabinet and kitchen work in Mesquite typically falls in these estimated ranges, and the written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Kitchen Island Installation | $3,000 – $10,000 |
A typical CGI cabinet job in an older Mesquite kitchen starts with doors that no longer close flush and a soft, spongy toe-kick under the sink. Pulling the cabinet reveals a slow supply-line drip that has swollen the box bottom and rusted the slide mounts. A qualified local pro shuts off and repairs the leak, replaces the damaged base cabinet with a matching CGI box, re-levels the run and resets the countertop and backsplash so the new unit sits plumb. Call (844) 761-6059 for an exact quote. Estimates are free.
Book Your CGI Service in Mesquite, TX
Whether you’re refacing worn fronts, replacing a swollen sink base or planning a full kitchen with quartz counters, we’ll connect you with a pro who knows CGI cabinets and knows Mesquite’s housing stock. Our technicians have up to 13 years of experience, and every estimate is free with a written line-item quote. Call (844) 761-6059. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Closed Saturday.
Written by the team at Construction Mesquite.