Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Kitchen Remodeling Across Garland
Garland kitchens sit on two very different kinds of ground, and that changes how a remodel starts. On the older ranch blocks built from the 1950s into the 1970s, we’re usually correcting a pier-and-beam subfloor before a single cabinet box goes in. In the newer subdivisions toward the east side, we’re checking slab flatness against Blackland Prairie clay movement instead. Knowing which job you’re walking into is most of the battle, and it’s why our technicians have up to 13 years of experience reading these homes. We help you choose materials, plan the layout, and pull the permits, all under one contract. Call (844) 761-6059 to schedule your free estimate. We answer 24/7.
Why Garland Homeowners Call Construction Mesquite for Kitchen Remodeling
We keep a clear scope of work at the center of every Garland project, because that’s what separates a smooth remodel from a mid-job argument. You get a written, line-item estimate before work starts, permits pulled, and inspections passed as we go. One contractor handles the whole job: cabinetry, countertops, tile, plumbing rough-in and finish, and the punch list at the end. No chasing four separate trades across Garland.
Our reputation in Garland is built on doing the unglamorous prep work right. On flat-lot ranch streets, that means leveling framing before cabinets are set. In the newer east and south neighborhoods, it means checking for slab cracks and high spots before a full-tile floor goes down. Both matter, and both show up on the estimate as line items rather than surprises.
Response time to Garland is quick because it sits right next to our primary service area in Mesquite, so scheduling an initial visit is easy. If you’re comparing quotes and want a straight read on what your kitchen actually needs, call (844) 761-6059 and we’ll book your free estimate.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Kitchen Remodeling Services in Garland
Whether you’re working with a 1950s ranch off a flat-lot block or a 1990s build in the south neighborhoods, our kitchen remodeling team handles the full scope. Here’s what that looks like in Garland.
Full Kitchen Remodeling
A full gut remodel in Garland usually means new cabinets, countertops, backsplash, flooring, and fixtures, plus the rough-in work behind the walls. On pier-and-beam homes, the first step is often bringing the subfloor into level with the original post-and-beam framing before anything else is set. On newer slab-on-grade homes, we check flatness and any movement first. Our technicians have up to 13 years of experience sequencing that prep so the finish work lands true.
Cabinets & Countertops
Cabinet choice drives the whole look and most of the budget. We help you choose between KraftMaid and Wellborn lines, then pair them with Cambria or Silestone quartz for the counters. Cabinet installation and refacing in Garland typically starts around $4,000 and can run to $13,000 for a full replacement with new boxes. Quartz and granite countertops typically run $2,000 – $6,500 depending on the run length and edge detail.
Kitchen Design & Layout
Layout decisions get expensive once the drywall is up, so we settle them on paper first. Garland ranches often have a tight galley or an enclosed kitchen that opens up well when you take down a wall; newer subdivision kitchens tend to have more room but awkward traffic patterns. We walk the space, mark clearances, and plan where the island, sink, and range land before we order a single cabinet.
Backsplash, Tile & Flooring
Backsplash work in Garland typically runs $800 – $2,500, and it’s the fastest way to change a kitchen’s character. Full tile floors need a flat substrate, which is why we correct the floor plane before setting tile. On slab-on-grade homes, that means grinding high spots and filling cracks first. On pier-and-beam, it means leveling framing so the tile doesn’t telegraph every dip.
Small & Partial Kitchen Remodels
Not every Garland job is a gut renovation. A partial remodel, swapping cabinets and counters without moving plumbing or walls, typically falls in the $9,000 – $20,000 range. It’s a good fit when the layout works and only the surfaces are tired. We scope it the same way, with a written estimate that lists every line.
Trusted Brands We Service in Garland
We source cabinetry from KraftMaid and Wellborn, and countertops from Cambria and Silestone, so Garland homeowners choose from recognized names rather than tracking materials down. Those brands carry the durability that matches a serious kitchen investment. Every product option is quoted as a line item in the written estimate, with no mid-job surprises. When you compare Garland quotes, look at whether the cabinet and countertop brands are named. A cheap quote that lists “cabinets” as one number is where the trouble starts.
Common Kitchen Remodeling Problems We See in Garland Homes
- Cabinets set on an uncorrected pier-and-beam subfloor. When the original post-and-beam framing has crept out of level and cabinets go down anyway, doors and drawers rack within a season and countertop seams open up. Correcting the floor plane first is the only fix that holds.
- Walls closed up before the rough-in inspection sign-off. If plumbing or electrical gets covered before the inspector signs off, you’re paying a change order to reopen the kitchen. We sequence the inspection into the schedule so it never lands on you.
- Allowances left off the scope. A quote that doesn’t name the cabinet line or countertop brand turns a standard upgrade into a mid-job surprise. Every choice belongs on the page before work starts.
- Slab movement on newer Garland subdivisions. Blackland Prairie clay swells and shrinks with North Texas’ wet-dry cycles, and a full-tile floor or a heavy island telegraphs every high spot. Checking flatness first saves the finish.
See the difference
Before
After
Before
After
Before
AfterPricing for Kitchen Remodeling in Garland, TX
A full kitchen remodel in Garland typically runs $14,000 – $45,000, and the written estimate sets the final price. The range is wide because a 1950s ranch gut with subfloor correction and a 1990s subdivision kitchen are different jobs from the first day. Newer kitchens often need less framing work but more flatness correction; older ones need the framing done right before cabinets can go down. Cabinet line, countertop material, and whether walls move all shift the number. Here’s how the line items typically break down in Garland.
| Scope | Typical Estimated Range |
|---|---|
| Full Kitchen Remodel | $14,000 – $45,000 |
| Small & Partial Kitchen Remodels | $9,000 – $20,000 |
| Cabinet Installation & Refacing | $4,000 – $13,000 |
| Quartz & Granite Countertops | $2,000 – $6,500 |
| Backsplash | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
These are estimates, not quotes. Call (844) 761-6059 for a free estimate written against your actual kitchen.
The Two Garland Housing Conditions That Shape a Kitchen Remodel
This is the thing that makes Garland kitchen work different from most DFW suburbs. On the older flat-lot blocks, many homes built in the 1950s and 1960s are pier-and-beam construction, and the original post-and-beam framing has often crept out of level over decades. A kitchen gut there exposes that first. Cabinets can’t be set, and a countertop can’t be templated, until the subfloor is brought into level with the original framing. Get that wrong and doors and drawers rack, and countertop seams open within a season.
Move east or south into the 1980s – 2000s subdivisions, and you’re on slab-on-grade instead. The flatness problem there is different: it’s slab movement from Blackland Prairie clay that swells and shrinks with North Texas’ wet-dry cycles. A load-bearing island or a full-tile floor will telegraph every high spot, so we check flatness and any crack movement before setting a thing. Same trade, two different prep problems. Proper prep, a written scope, and the rough-in inspection sign-off before the walls close up protect both the job and any later insurance conversation about the work.
How it usually goes on the older ranch blocks: a kitchen gut exposes a subfloor that’s out of level, framing gets corrected, then plumbing and electrical rough-in is sequenced and the permit inspection is signed off before insulation and drywall go up. In the newer east-side subdivisions, the same remodel starts with a flatness check and crack inspection instead.
We Also Serve Cities Near Garland
We work kitchen remodels and the full exterior-to-interior scope in the cities that surround Garland. That includes Richardson, Murphy, University Park, and Mesquite. One contractor, every project phase, from the driveway to the roofline. If you’re in one of those cities and planning a kitchen, call (844) 761-6059. Fast dispatch from 7am to 7pm, Sunday through Friday.
Serving Garland, TX – Our Local Coverage Area
We serve Garland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Kitchen Remodeling in Garland
Most kitchen remodels in Garland need a permit, and the inspection covers the in-wall and in-floor systems before they’re closed up. That means the plumbing rough-in, the electrical rough-in, and any framing changes get checked before insulation and drywall go on. Skipping the sign-off risks a change order later. We pull the permits and schedule the inspection into the job so it’s never an afterthought. Call (844) 761-6059 for a free estimate and we’ll lay out the permit steps for your kitchen.
No, not safely on a Garland pier-and-beam home with a subfloor that’s out of level. A 12-inch-deep base cabinet set on uneven framing racks as soon as it’s loaded, and the countertop seams open within a season. The floor plane has to be corrected first. That’s prep work, and it belongs on the written estimate. Call (844) 761-6059 to schedule your free estimate.
A written scope for a Garland kitchen should name the cabinet line, the countertop brand and material, the tile choices, and every allowance, plus the permit and inspection steps. Anything left as “cabinets: one lump sum” is where mid-job surprises live. Ours is line-item, so you can see exactly what each piece costs before you commit. Call (844) 761-6059 for a free written estimate.
Yes, removing a load-bearing wall in a Garland ranch requires an engineered solution, usually a beam and post sized to carry the load. It’s not a weekend framing job; it needs a design and a permit. That’s especially true on older pier-and-beam homes where the framing has already shifted. We handle the engineering and the permit as part of the scope. Call (844) 761-6059 for a free estimate.
Plan the island against the corrected floor plane, not the existing one. On a Garland slab-on-grade kitchen, an island adds load and a full-tile floor telegraphs every high spot, so flatness has to be checked and corrected first. On a pier-and-beam home, the framing gets leveled before the island footprint is set. Kitchen island installation in Garland typically runs $3,000 – $10,000. Call (844) 761-6059 for a free estimate.
Ready to start? Call (844) 761-6059 to schedule your free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. One contractor, every project phase, from the first flatness check to the punch list.
Written by the team at Construction Mesquite.