Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Fence Installation Across Highland Park
If you’re planning a fence along a Highland Park property line, the first thing worth knowing is this: in most of Highland Park, the fence doesn’t get designed at the lumber yard. It gets designed against the Town’s design review standards and the tree ordinance, and those two things shape the layout long before anyone sets a post. Construction Mesquite handles fence installation with that reality built into the written scope, from the survey to the final gate swing. Whether you’re on a tree-filled lot near Lakeside Drive or a corner property off Armstrong Parkway, the job starts with the same question: what will the Town approve, and what will the oaks allow? Call (844) 761-6059 to get a free estimate going.
Why Highland Park Homeowners Call Construction Mesquite for Fence Installation
Highland Park isn’t Dallas with a different mailing address. It’s a small town with its own Design Review Board, its own tree ordinance, and a preservation culture that treats a fence as part of the streetscape, not just a privacy screen. That means the contractors who do well here are the ones who can read a lot, submit scaled drawings that match the Town’s architectural vocabulary, and coordinate an arborist before the first auger turns. Our technicians have up to 13 years of experience, and the work we handle in Highland Park leans heavily on exactly that skill set.
Homeowners here tend to call us after a fence project has already stalled once. A contractor quoted a fence, ordered materials, then discovered the property line runs through the root protection zone of a mature live oak, or the proposed height crossed a threshold that triggered a review. We start from the other end: survey, tree assessment, then design. It’s slower up front and faster overall. You get a free estimate built on what the site will actually allow, a written line-item quote, and a single point of accountability from permit to punch-list. One contractor, every project phase.
We work across the whole envelope of a Highland Park home, not just the fence line. That matters when the project grows. A new fence often sits alongside a gate rebuild, a driveway replacement, or an exterior refresh, and coordinating those with one team beats juggling three specialists who each blame the other’s schedule.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Fence Installation Services in Highland Park
The three materials that come up most often on Highland Park lots are wood, iron, and gates, because they’re the ones that hold up against the Town’s design review expectations and the architectural styles of the homes here. Vinyl and aluminum come up too, especially on side and service yards where visibility from the street is limited. Here’s how each tends to play out.
Wood Fence Installation
A wood fence is the default choice for a Highland Park privacy run, and for good reason: it reads correctly against Georgian, Spanish Colonial, and French Eclectic facades in a way a panel fence never will. The trade-off is that wood needs more thought about the submittal. Height, cap style, picket spacing, and finish all get judged against the Town’s style guidelines, and a design that doesn’t match the house can get sent back for a redesign after the lumber is already ordered. We build the design review step into the schedule so that doesn’t happen.

Iron Fence Installation
Iron and ornamental steel fencing is what you see in front of the larger estates, and it’s the material that best handles the Town’s expectations for a street-facing fence. It also survives the North Texas sun and spring storms far better than wood over the long run. The detail that trips up iron installs here is foundation. Expansive clay soils move seasonally, so footings need to be sized and set deep enough that the fence line doesn’t walk out of plumb within a season. That’s a spec decision, not a guess.

Fence Gate Installation and Rebuilds
A gate is where a fence project usually gets interesting. Driveway gates, pedestrian gates, and side-yard gates on a Highland Park estate often carry the design weight of the whole run, and they’re the piece most likely to trigger a closer look from the Design Review Board. We build gates to match the fence panel, hang them on hardware rated for the load, and set the posts deep enough that the gate doesn’t sag as the clay soil shifts.

Vinyl and Aluminum Fence Options
Vinyl and aluminum fencing work well on Highland Park lots where the fence line sits back from the street and design review is less of a factor. Typical estimated ranges for these materials run $3,500 – $9,000 for vinyl and $4,000 – $10,000 for aluminum, depending on run length, height, and gate count. Both hold their color in the North Texas sun without the repainting a wood fence eventually needs.
Trusted Brands We Service in Highland Park
The name on the box matters less than what’s specified for your site. We work with established fencing manufacturers including Master Halco, Ameristar, Jerith, and Barrette, and we help you choose the specific product line that fits the fence’s job: an Ameristar ornamental run for the street-facing fence, a Barrette vinyl panel for a side yard, a Jerith aluminum gate for a service entrance. Material sourcing is built into the scope, so you’re choosing from name-brand options rather than researching and procuring panels on your own. When a product line is on a longer lead time, we tell you up front and build it into the schedule.
Common Fence Installation Problems We See in Highland Park Homes
- Design Review Board rejections after materials are ordered. A fence above the Town’s height limits, or one visible from the street, can require DRB approval, and a submittal that doesn’t match the Town’s architectural style guidelines comes back for redesign. Sorting style and height before ordering is the fix.
- Post holes dug into a protected tree’s root zone. The Town’s tree ordinance requires a permit to remove or prune any tree over a certain caliper, and mature live oaks and pecans dominate many Highland Park lots. Post holes set too close to a protected root zone can trigger root barriers or hand excavation that wasn’t in the original bid.
- Posts that heave or lean within a season. Highland Park’s expansive clay soils shrink and swell with the seasons, and a fence footer sized for stable ground will walk out of plumb. Deeper footings and proper drainage are the answer, and they get priced in, not added later.
- Fence lines that ignore the canopy. A layout drawn on paper without walking the mature trees on the lot often ends up cutting through the root protection zone of a live oak the homeowner never intended to disturb. A survey and arborist report before design prevents it.
How the Design Review Board and Tree Ordinance Shape a Highland Park Fence
This is the part of a Highland Park fence project that a generic installation page won’t tell you. Any fence visible from the street, or one that exceeds the Town’s height limits, requires Design Review Board approval, and the Town enforces a tree ordinance that requires a permit before removing or pruning any tree over a certain caliper. On a lot with mature live oaks and pecans, the tree ordinance can block a fence line outright if the layout encroaches on a protected root protection zone. So in practice, fence layout here is often dictated by an arborist report and a DRB submittal before a single post is set.
Here’s how a typical job usually goes. A homeowner wants a privacy fence that matches the estate’s Georgian or Spanish Colonial architecture. The project stalls when the contractor discovers the property line runs within a protected tree’s root zone, or the proposed height triggers DRB review. The usual fix is to commission a survey and arborist report, redesign the fence with hand-dug post holes and root barriers, and submit scaled drawings to the Town for approval, which often adds weeks to the schedule. Qualified local pros build the allowance for those pre-construction steps into the written scope so the homeowner isn’t surprised by change orders later. We price it that way from the start.
See the difference
Before
After
Before
After
Before
AfterPricing for Fence Installation in Highland Park, TX
A typical fence installation in Highland Park runs $3,500 – $9,000 for a vinyl run and $4,000 – $10,000 for aluminum, with wood and iron pricing built from the same written line-item format. Those are estimated ranges, and the written estimate sets the final price. What moves the number: run length, fence height, gate count and gate hardware, material line, and whether the site needs a survey, arborist report, root barriers, hand excavation, or a DRB submittal. On a tree-dense Highland Park lot, those pre-construction items can be a meaningful part of the total, and we list them separately so you can see them. The estimate is free, and the price is fixed in writing before we order a single panel.
| Material | Typical Estimated Range |
|---|---|
| Vinyl Fence Installation | $3,500 – $9,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
We Also Serve Cities Near Highland Park
Highland Park sits inside a tight cluster of Park Cities and North Dallas neighborhoods, and we handle fence work in the surrounding cities as well: University Park, Dallas, Farmers Branch, and Addison. The rules shift as you cross a boundary, so the local requirements in each city get checked before design. That’s a good reason to confirm your city’s requirements with its building department before ordering material.
Serving Highland Park, TX – Our Local Coverage Area
We serve Highland Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fence Installation in Highland Park
Yes, if the fence is visible from the street or exceeds the Town’s height limits, it generally requires Design Review Board approval. A submittal that doesn’t match the Town’s architectural style guidelines can come back for redesign, so we sort style and height before ordering materials. Call (844) 761-6059 to talk through your fence line and get a free estimate.
The Town’s tree ordinance requires a permit to remove or prune any tree over a certain caliper, and that directly shapes where a fence can go. If the property line runs through a protected root protection zone, the layout has to change, usually with hand-dug post holes and root barriers. We build that pre-construction step into the scope so it isn’t a surprise later. Call (844) 761-6059 to schedule your free estimate.
Fence styles that read correctly against the home’s architecture tend to get through review: ornamental iron for Georgian and Spanish Colonial facades, wood with a cap for privacy runs, and detailing that respects the Town’s style guidelines. A modern panel fence on a pre-1960s estate is the kind of design that stalls. We help you choose a style that matches the house and the submittal. Call (844) 761-6059 for a free estimate.
Highland Park’s expansive clay soils shrink and swell with the seasons, and a fence footer sized for stable ground will heave or lean within a season. The fix is deeper footings and proper drainage, priced into the quote rather than added later. We spec the footer to the soil, not to a default. Call (844) 761-6059 to schedule your free estimate.
Often yes, but the layout usually needs an arborist report and a survey first, and the fence may need hand-dug post holes and root barriers to protect the trees. The Town’s tree ordinance governs what can be pruned or removed, so the line has to be drawn around the protected root zones. We price that pre-construction work in the written estimate. Call (844) 761-6059 to get started.
Get a Free Fence Estimate in Highland Park
Fence work in Highland Park rewards planning. Survey, tree assessment, style and height sorted against the Town’s standards, then a written line-item quote that holds. That’s the sequence, and it’s the one that keeps a project from stalling after the materials are on site. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday. Call (844) 761-6059 to schedule your free estimate.
Written by the team at Construction Mesquite.